Robohub.org
 

Robots in the rough: Demo day at FSR Toronto


by
07 July 2015



share this:

Nothing proves a robot’s mettle like a live demonstration in front of a discerning crowd. Check out these photos and videos from Demo Day at the recent Field and Service Robotics conference (FSR) in Toronto. 

 

Tethered Robotic Explorer (TReX)

Autonomous Space Robotics Lab (Tim Barfoot), University of Toronto

 

June 26, 2015 - The Tethered Robotic Explorer (TReX) robot being described by Patrick McGarey to a visiting group. The newly conceived platform was unveil to the public for the first time. TReX can climb many kind of steep terrain with the help of its onboard tether management system. It weighs roughly 90 kg and was built over a Husky from Clearpath Robotics. Photo credit: François Pomerleau - University of Toronto

June 26, 2015 – Patrick McGarey unveiling the new Tethered Robotic Explorer (TReX) robot to a group of attendees at the Field and Service Robotics conference (FSR) demo day.  Photo credit: François Pomerleau – University of Toronto.

 

Trex_FSR

TReX can climb various kinds of steep terrain with the help of its onboard tether management system. Here it climbs a 60 degree metallic roof of the UTIAS Mars Dome. Photo credit: Hallie Siegel.

 

Photo credit:

June 26, 2015 – TReX climbs a small flight of stairs before entering the Mars Dome at UTIAS. Photo credit: François Pomerleau – University of Toronto.

 

June 26, 2015 - TReX climbs a small flight of stairs. Photo credit: François Pomerleau - University of Toronto.

TReX weighs roughly 90 kg and was built on a Husky from Clearpath Robotics. Photo credit: François Pomerleau – University of Toronto.

 

TReX build

 

 

Grizzly RUV

Autonomous Space Robotics Lab (Tim Barfoot), University of Toronto

 

June 26, 2015 -  Grizzly RUV negotiating a sharp turn on a bumpy terrain composed of sand and gravel. The Grizzly RUV is built by Clearpath Robotics and weighs around 1000 kg. Autonomous driving capabilities were demonstrated over a long distance using only one stereo camera in a GPS denied environment. Photo credit: François Pomerleau - University of Toronto.

June 26, 2015 – Grizzly RUV negotiating a sharp turn on a bumpy terrain composed of sand and gravel. The Grizzly RUV is built by Clearpath Robotics and weighs around 1000 kg. Autonomous driving capabilities were demonstrated over a long distance using only one stereo camera in a GPS denied environment. Photo credit: François Pomerleau – University of Toronto.

 

 Grizzly RUV crossing dense vegetation and reaching autonomously one of its intermediate goal under the blue gazebo. The robot drove through different types of environments (ex.: indoor, outdoor, road, tall grass) using the same algorithms.  Photo credit: François Pomerleau - University of Toronto.

Grizzly RUV crossing dense vegetation and reaching autonomously one of its intermediate goals under a blue gazebo. The robot can drive through different types of environments — indoors, outdoors, on roads, and through tall grasses — using the same algorithms. Photo credit: François Pomerleau – University of Toronto.

 

Robust control for quadcopters

Dynamic Systems Lab (Angela Schoellig), University of Toronto

 

June 26, 2015 - Karime Pereida Pérez launching a flight sequence for an Unmanned Aerial Vehicle (UAV). In the background, Rikky Duivenvoorden awaiting to apply interference forces on the UAV from inside the flying arena. Robust control under large perturbations was demonstrated using a quadcopter tracked by a Vicon system.  Photo credit: François Pomerleau - University of Toronto.

June 26, 2015 – Robust control under large perturbations was demonstrated using a quadcopter tracked by a Vicon system. Photo credit: François Pomerleau – University of Toronto.

 

Karime Pereida Pérez launching a flight sequence for an Unmanned Aerial Vehicle (UAV). In the background, Rikky Duivenvoorden awaiting to apply interference forces on the UAV from inside the flying arena. Photo credit: François Pomerleau - University of Toronto.

June 26, 2105 – Karime Pereida Pérez launching a flight sequence for an Unmanned Aerial Vehicle (UAV). In the background, Rikky Duivenvoorden awaiting to apply interference forces on the UAV from inside the flying arena. Photo credit: François Pomerleau – University of Toronto.

 

Hexrotor drone

Waterloo Autonomous Vehicles Laboratory (Steven Waslander), University of Waterloo

 

June 26, 2015 - The Waterloo Autonomous Vehicles Laboratory hexrotor drone, affectionately named Olga, sports three high-speed wide field-of-view cameras, which it uses to determine its own motion in unknown environments. Olga recently flew in Kelowna, BC at the NCFRN Field Trials, where it used the multi-camera cluster to construct maps of cliff faces and hiking trails, similar to those needed in mining and agriculture inspection applications. Photo credit: François Pomerleau - University of Toronto.

June 26, 2015 – The Waterloo Autonomous Vehicles Laboratory hexrotor drone, affectionately named Olga, sports three high-speed wide field-of-view cameras, which it uses to determine its own motion in unknown environments. Olga recently flew in Kelowna, BC at the NCFRN Field Trials, where it used the multi-camera cluster to construct maps of cliff faces and hiking trails, similar to those needed in mining and agriculture inspection applications. Photo credit: François Pomerleau – University of Toronto.

 

 

 

 

SL Commander

MDA Robotics and Automation

June 26, 2015 - The SL Commander with its sensor suite (laser, stereo camera, mono cameras) on a football field. The SL Commander was built by Bombardier Recreational Products (BRP) under the supervision of MDA. The rover is fully electric and weighs around 1200 kg. The maximal speed (40 km/h) and controllability of the platform were demonstrated by remotely operating the vehicle without a driver. Photo credit: François Pomerleau - University of Toronto.

June 26, 2015 – The SL Commander with its sensor suite (laser, stereo camera, mono cameras) on a football field. The SL Commander was built by Bombardier Recreational Products (BRP) under the supervision of MDA. The rover is fully electric and weighs around 1200 kg. The maximal speed (40 km/h) and controllability of the platform were demonstrated by remotely operating the vehicle without a driver. Photo credit: François Pomerleau – University of Toronto.


About FSR

The bi-annual Field and Service Robotics conference is focused on applying robots to real-world problems such as monitoring lakes and oceans, autonomous wheelchairs, automated mining, space exploration, drones, and self-driving cars. You can learn more about FSR and the papers presented at this year’s conference on the FSR Toronto website, or check out the FSR Toronto coverage on Robohub. The next edition of FSR is schedule to take place in Zurich, Switzerland in 2017.

June 26, 2015 - Participants of the 10th Conference on Field and Service Robotics (FSR). The conference hosted roughly 100 participants and 42 original scientific papers were presented. Photo credit: François Pomerleau - University of Toronto

June 26, 2015 – Participants of the 10th Conference on Field and Service Robotics (FSR). The conference hosted roughly 100 participants and 42 original scientific papers were presented. Photo credit: François Pomerleau – University of Toronto.

 



If you liked this article, you may also be interested in:

See all the latest robotics news on Robohub, or sign up for our weekly newsletter.



tags: , ,


François Pomerleau is a postdoc at the University of Toronto in the Autonomous Space Robotics Lab.
François Pomerleau is a postdoc at the University of Toronto in the Autonomous Space Robotics Lab.





Related posts :



Robot Talk Episode 126 – Why are we building humanoid robots?

  20 Jun 2025
In this special live recording at Imperial College London, Claire chatted to Ben Russell, Maryam Banitalebi Dehkordi, and Petar Kormushev about humanoid robotics.

Gearing up for RoboCupJunior: Interview with Ana Patrícia Magalhães

and   18 Jun 2025
We hear from the organiser of RoboCupJunior 2025 and find out how the preparations are going for the event.

Robot Talk Episode 125 – Chatting with robots, with Gabriel Skantze

  13 Jun 2025
In the latest episode of the Robot Talk podcast, Claire chatted to Gabriel Skantze from KTH Royal Institute of Technology about having natural face-to-face conversations with robots.

Preparing for kick-off at RoboCup2025: an interview with General Chair Marco Simões

and   12 Jun 2025
We caught up with Marco to find out what exciting events are in store at this year's RoboCup.

Interview with Amar Halilovic: Explainable AI for robotics

  10 Jun 2025
Find out about Amar's research investigating the generation of explanations for robot actions.

Robot Talk Episode 124 – Robots in the performing arts, with Amy LaViers

  06 Jun 2025
In the latest episode of the Robot Talk podcast, Claire chatted to Amy LaViers from the Robotics, Automation, and Dance Lab about the creative relationship between humans and machines.

Robot Talk Episode 123 – Standardising robot programming, with Nick Thompson

  30 May 2025
In the latest episode of the Robot Talk podcast, Claire chatted to Nick Thompson from BOW about software that makes robots easier to program.

Congratulations to the #AAMAS2025 best paper, best demo, and distinguished dissertation award winners

  29 May 2025
Find out who won the awards presented at the International Conference on Autonomous Agents and Multiagent Systems last week.



 

Robohub is supported by:




Would you like to learn how to tell impactful stories about your robot or AI system?


scicomm
training the next generation of science communicators in robotics & AI


©2025.05 - Association for the Understanding of Artificial Intelligence


 












©2025.05 - Association for the Understanding of Artificial Intelligence