Robohub.org
 

Robot simulators and why I will probably reject your paper

by
18 December 2014



share this:
 source images: Webots by Cyberbotics Ltd.

source images: Webots by Cyberbotics Ltd.

Dear robotics and AI researcher,

Do you use simulation as a research tool? If you write papers with results based on simulation and submit them for peer-review, then be warned: if I should review your paper then I will probably recommend it is rejected. Why? Because all of the many simulation-based papers I’ve reviewed in the last couple of years have been flawed. These papers invariably fall into the pattern: propose new/improved/extended algorithm X; test X in simulation S and provide test results T; on the basis of T declare X to work; the end.

So, what exactly is wrong with these papers? Here are my most common review questions and criticisms.

  1. Which simulation tool did you use? Was it a well-known robot simulator, like Webots or PlayerStageGazebo, or a custom written simulation? It’s amazing how many papers describe X, then simply write “We have tested X in simulation, and the results are…”
  2. If your simulation was custom built, how did you validate the correctness of your simulator? Without such validation how can you have any confidence in the the results you describe in your paper? Even if you didn’t carry out any validation, please give us a clue about your simulator; is it for instance sensor-based (i.e. models specific robot sensors, like infra-red collision sensors, or cameras)? Does it model physics in 3D (i.e. dynamics), or 2D kinematics? 
  3. You must specify the robots that you are using to test your algorithm X. Are they particular real-world robots, like e-pucks or the NAO, or are they an abstraction of a robot, i.e. an idealised robot? If the latter, describe that idealised robot: does it have a body with sensors and actuators, or is your idealised robot just a point moving in space? How does it interact with other robots and its environment? 
  4. How is your robot modelled in the simulator? If you’re using a well-known simulator and one of its pre-defined library robots, then this is an easy question to answer. But for a custom designed simulator or an idealised robot it is very important to explain how your robot is modelled. Equally important is how your robot model is controlled, since the algorithm X you are testing is – presumably – instantiated or coded within the controller. It’s surprising how many papers leave this to the reader’s imagination.
  5. In your results section you must provide some analysis of how the limitations of the simulator, the simulated environment, and the modelled robot are likely to have affected your results. It is very important that your interpretation of your results, and any conclusions you draw about algorithm X, explicitly take account of these limitations. All robot simulators, no matter how well proven and well debugged, are simplified models of real robots and real environments. The so-called reality gap is especially problematical if you are evolving robots in simulation, but even if you are not, you cannot confidently interpret your results without understanding the reality gap.
  6. If you are using an existing simulator then specify exactly which version of the simulator you used, and provide somewhere – a link perhaps to a github project – your robot model and controller code. If your simulator is custom built then you need to provide access to all of your code. Without this your work is unrepeatable and therefore of very limited value.

Ok. At this point I should confess that I’ve made most of these mistakes in my own papers. In fact one of my most cited papers was based on a simple custom built simulation model with little or no explanation of how I validated the simulation. But that was 15 years ago, and what was acceptable then is not ok now.

Modern simulation tools are powerful but also dangerous. Dangerous because it is too easy to assume that they are telling us the truth. Especially beguiling is the renderer, which provides an animated visualisation of the simulated world and the robots in it. Often the renderer provides all kinds of fancy effects borrowed from video games, like shadows, lighting and reflections, which all serve to strengthen the illusion that what we are seeing is real. I puzzle and disappoint my students because, when they proudly show me their work, I insist that they turn off the renderer. I don’t want to see a (cool) animation of simulated robots, instead I want to see (dull) graphs or other numerical data showing how the improved algorithm is being tested and validated, in simulation.

An engineering simulation is a scientific instrument* and, like any scientific instrument, it must be (i) fit for purpose, (ii) setup and calibrated for the task in hand, and (iii) understood – especially its limitations – so that any results obtained using it are carefully interpreted and qualified in the light of those limitations.

Good luck with your research paper!


*Engineering Simulations as Scientific Instruments is the working title of a book, edited by Susan Stepney, which will be a major output of the project Complex Systems Modelling and Simulation (CoSMoS).



tags: , , ,


Alan Winfield is Professor in robotics at UWE Bristol. He communicates about science on his personal blog.
Alan Winfield is Professor in robotics at UWE Bristol. He communicates about science on his personal blog.





Related posts :



Robot Talk Episode 92 – Gisela Reyes-Cruz

In the latest episode of the Robot Talk podcast, Claire chatted to Gisela Reyes-Cruz from the University of Nottingham about how humans interact with, trust and accept robots.
04 October 2024, by

Robot Talk Episode 91 – John Leonard

In the latest episode of the Robot Talk podcast, Claire chatted to John Leonard from Massachusetts Institute of Technology about autonomous navigation for underwater vehicles and self-driving cars. 
27 September 2024, by

Interview with Jerry Tan: Service robot development for education

We find out about the Jupiter2 platform and how it can be used in educational settings.
18 September 2024, by

#RoboCup2024 – daily digest: 21 July

In the last of our digests, we report on the closing day of competitions in Eindhoven.
21 July 2024, by and

#RoboCup2024 – daily digest: 20 July

In the second of our daily round-ups, we bring you a taste of the action from Eindhoven.
20 July 2024, by and

#RoboCup2024 – daily digest: 19 July

Welcome to the first of our daily round-ups from RoboCup2024 in Eindhoven.
19 July 2024, by and





Robohub is supported by:




Would you like to learn how to tell impactful stories about your robot or AI system?


scicomm
training the next generation of science communicators in robotics & AI


©2024 - Association for the Understanding of Artificial Intelligence


 












©2021 - ROBOTS Association