Robohub.org
 

Fully autonomous flapping-wing micro air vehicle weighs about as much as 4 sheets of A4 paper


by
16 December 2013



share this:
DelFlyExplorerInFlight
The DelFly Explorer, a flapping wing MAV equipped with a 4-gram stereo vision system that can fly completely by itself in unknown, cluttered environments. © Delft University of Technology.

The DelFly Explorer is the first flapping wing Micro Air Vehicle (MAV) that is able to fly with complete autonomy in unknown environments. Weighing just 20 grams and with a wingspan of 28cm, it is equipped with an onboard stereo vision system. The DelFly Explorer can perform an autonomous take-off, keep its height, and avoid obstacles for as long as its battery lasts (~9 minutes). All sensing and processing is performed on board, so no human or offboard computer is in the loop.

Inspired by flying animals, flapping-wing MAVs are highly manoeuvrable, able to quickly transition between multiple flight regimes (such as between hover and forward flying), and are robust to collisions. Their low weight and unobtrusive appearance, as well their ability to fly at low speeds and operate quietly, make them more suitable for use indoors or in the presence of humans than many other aerial platforms. There are many future applications, such as the detection of ripe fruit in green houses, for which flapping wing MAVs would need to fly without human intervention.

However, designing flapping-wing MAVs that are capable of autonomous flight is challenging, because of their small scale and extremely limited payload capabilities. Therefore, previous work in this area either focused on sub-tasks (such as led-following) or out-sourced parts of the sensing and control to external cameras and/or computers.

We achieved the fully autonomous flight of the DelFly Explorer by resolving the following four main challenges:

  1. Onboard sensing/processing: We have developed a 4-gram onboard stereo vision system (2 cameras + processor) and 1-gram onboard autopilot with processor, barometer, accelerometers and gyros.
  2. Vision algorithms: We developed a new approach to purposive vision, in which the vision algorithms make use of sub-sampling and extract only as many image samples as necessary for subsequent control. As a result, all vision algorithms run at frame rate. Specifically, we designed efficient vision algorithms that can cope with the absence of visual texture, as often happens in indoor environments (see the empty walls in the lecture room as an example). The algorithms also deal with the distortions that are introduced by the combination of the flapping motion and the rolling shutter cameras.
  3. Control algorithms: We devised a control algorithm that ensures obstacle-free flight by construction. It takes into account the fact that the DelFly Explorer cannot hover in place by always ensuring an obstacle-free region in which the DelFly can turn around. The height control is based on the onboard barometer.
  4. Payload capability: Compared to its predecessor (the 16-gram, 28cm wingspan flapping-wing DelFly II), the Explorer’s payload capability was increased enough to carry the stereo vision system and autopilot. This was achieved both by a redesign of the wings and by a reduction in the number of coils in the brushless motors.

We have performed experiments in various indoor spaces, ranging from lecture rooms to office rooms and lab spaces. Below, you see a part of an autonomous flight in a lecture room at TU Delft. The image has been made by retaining the motion regions every 10 frames in the experimental video. The original experimental video can be seen here.

DelFly_Collage
A small part of the DelFly Explorer’s trajectory during a 9-minute autonomous flight. It runs efficient vision and control algorithms on board in order to avoid obstacles in the environment. © Delft University of Technology.

The current algorithms allow collision-free flight, but do not yet form a complete solution to autonomous exploration. We are working to extend the DelFly’s exploration capabilities so that it can pass through open doors or windows, which it currently avoids.

For more information and videos, please visit the DelFly website.

Reference

“Autonomous Flight of a 20-gram Flapping Wing MAV with a 4-gram Onboard Stereo Vision System”, by C. De Wagter, S. Tijmons, B.D.W. Remes, and G.C.H.E. de Croon, (submitted).

Team

Christophe De Wagter
Sjoerd Tijmons
Bart Remes
Guido de Croon

Contact

g.c.h.e.decroon@tudelft.nl

If you liked this article, you may also be interested in:

See all the latest robotics news on Robohub, or sign up for our weekly newsletter.



tags: , , , , , ,


Guido de Croon is Full Professor at the Micro Air Vehicle lab of Delft University of Technology in the Netherlands.
Guido de Croon is Full Professor at the Micro Air Vehicle lab of Delft University of Technology in the Netherlands.





Related posts :



Robot Talk Episode 121 – Adaptable robots for the home, with Lerrel Pinto

  16 May 2025
In the latest episode of the Robot Talk podcast, Claire chatted to Lerrel Pinto from New York University about using machine learning to train robots to adapt to new environments.

What’s coming up at #ICRA2025?

  16 May 2025
Find out what's in store at the IEEE International Conference on Robotics & Automation, which will take place from 19-23 May.

Robot see, robot do: System learns after watching how-tos

  14 May 2025
Researchers have developed a new robotic framework that allows robots to learn tasks by watching a how-to video

AI-powered robots help tackle Europe’s growing e-waste problem

  12 May 2025
EU-funded researchers have developed adaptable robots that could transform the way we recycle electronic waste, benefiting both the environment and the economy.

Robot Talk Episode 120 – Evolving robots to explore other planets, with Emma Hart

  09 May 2025
In the latest episode of the Robot Talk podcast, Claire chatted to Emma Hart from Edinburgh Napier University about algorithms that 'evolve' better robot designs and control systems.

Robot Talk Episode 119 – Robotics for small manufacturers, with Will Kinghorn

  02 May 2025
In the latest episode of the Robot Talk podcast, Claire chatted to Will Kinghorn from Made Smarter about how to increase adoption of new tech by small manufacturers.

Multi-agent path finding in continuous environments

  01 May 2025
How can a group of agents minimise their journey length whilst avoiding collisions?

Interview with Yuki Mitsufuji: Improving AI image generation

  29 Apr 2025
Find out about two pieces of research tackling different aspects of image generation.



 

Robohub is supported by:




Would you like to learn how to tell impactful stories about your robot or AI system?


scicomm
training the next generation of science communicators in robotics & AI


©2025.05 - Association for the Understanding of Artificial Intelligence


 












©2025.05 - Association for the Understanding of Artificial Intelligence