Robohub.org
 

Xconomy Forum’s final word about robots and jobs


by
12 April 2013



share this:

zconomy jobs promo
At the Xconomy Forum held in Palo Alto earlier this week, the focal topic was “Robots Remake the Workplace.” It was expected that the jobs issue would permeate the event. Do robots take away jobs? Instead, what was evident to all in the room was that all the speakers were in the new Service Robotics sector of the industry and they were all creating new jobs.

This post is part of Robohub’s Jobs Focus.

A few simple facts emerged:

  1. It’s true: industrial robots do take away jobs, often in big numbers. Generally, these are jobs that humans don’t want to do or shouldn’t be doing. After a short time, the displaced workers are replaced in higher level tasks (and perhaps re-distributed downstream or elsewhere). This process has already begun, and will continue.
  2. On the other hand, Service Robotics create jobs that didn’t exist before, often in respectable numbers — numbers that today,  as Service Robotics grows, may very well equal or exceed jobs lost by the use of industrial robots. And these new jobs could grow to much greater numbers as the industry continues to flourish. These are jobs that people want and that pay well.
  3. There is a political component not presently being adequately addressed as automation transforms the workplace by replacing humans with machines that have encapsulated their skills and can perform those skills flawlessly. Retraining and upgrading the general educational system to enable the higher tech skills needed for these new jobs needs a shot of reality instead of spin.
  4. Under the rubric that success breeds success, each recent successful robotics venture was less focused on the metrics of labor cost reduction than on enabling growth limited by hard-to-find labor.
Curt Carlson, President & CEO, SRI

Curt Carlson, President & CEO, SRI

As we move quickly toward what Curt Carlson, CEO of SRI International, said is a “zero inventory, zero delay, and 100% personalized” world, it will likely be true that fewer people will be working in manufacturing.

Carlson’s catchy phrase encapsulates both the complexity and simplicity of the process — and the momentum required for it to happen. The process will likely be driven by (1) lower costs of sensors, CPUs and hardware and (2) more capable AI; and the drivers propelling it forward will be the aging population and global competitiveness.

Thus jobs were not the main topic at the Xconomy Forum; the issue was an aside. The main topic was really the progress and inroads robotics are adding to the global automation and business solutions process.

The jobs issue did lend itself to the two best jokes of the day:

  1. Ten years from now all the robots will be out on strike saying, “Those damn 3D printers are taking away our jobs!”
  2. Let’s reconvene this debate 10 years from now when we have all this time on our hands [after our jobs have been replaced by robots].


tags: , , , , , , , ,


Frank Tobe is the owner and publisher of The Robot Report, and is also a panel member for Robohub's Robotics by Invitation series.
Frank Tobe is the owner and publisher of The Robot Report, and is also a panel member for Robohub's Robotics by Invitation series.





Related posts :



Robot Talk Episode 115 – Robot dogs working in industry, with Benjamin Mottis

  28 Mar 2025
In the latest episode of the Robot Talk podcast, Claire chatted to Benjamin Mottis from ANYbotics about deploying their four-legged ANYmal robot in a variety of industries.

Robot Talk Episode 114 – Reducing waste with robotics, with Josie Gotz

  21 Mar 2025
In the latest episode of the Robot Talk podcast, Claire chatted to Josie Gotz from the Manufacturing Technology Centre about robotics for material recovery, reuse and recycling.

Robot Talk Episode 113 – Soft robotic hands, with Kaspar Althoefer

  14 Mar 2025
In the latest episode of the Robot Talk podcast, Claire chatted to Kaspar Althoefer from Queen Mary University of London about soft robotic manipulators for healthcare and manufacturing.

Robot Talk Episode 112 – Getting creative with robotics, with Vali Lalioti

  07 Mar 2025
In the latest episode of the Robot Talk podcast, Claire chatted to Vali Lalioti from the University of the Arts London about how art, culture and robotics interact.

Robot Talk Episode 111 – Robots for climate action, with Patrick Meier

  28 Feb 2025
In the latest episode of the Robot Talk podcast, Claire chatted to Patrick Meier from the Climate Robotics Network about how robots can help scale action on climate change.

Robot Talk Episode 110 – Designing ethical robots, with Catherine Menon

  21 Feb 2025
In the latest episode of the Robot Talk podcast, Claire chatted to Catherine Menon from the University of Hertfordshire about designing home assistance robots with ethics in mind.

Robot Talk Episode 109 – Building robots at home, with Dan Nicholson

  14 Feb 2025
In the latest episode of the Robot Talk podcast, Claire chatted to Dan Nicholson from MakerForge.tech about creating open source robotics projects you can do at home.

Robot Talk Episode 108 – Giving robots the sense of touch, with Anuradha Ranasinghe

  07 Feb 2025
In the latest episode of the Robot Talk podcast, Claire chatted to Anuradha Ranasinghe from Liverpool Hope University about haptic sensors for wearable tech and robotics.





Robohub is supported by:




Would you like to learn how to tell impactful stories about your robot or AI system?


scicomm
training the next generation of science communicators in robotics & AI


©2024 - Association for the Understanding of Artificial Intelligence


 












©2021 - ROBOTS Association